Classic British Flight Sim

Works OK in P3Dv4 thanks.

Yes she works well in P3dv4 But having the same ground handling problems as Joe. Differential toe braking only works slightly The best I can achieve is several hundred yards radius Can't find this tail wheel radius thingy
Edit: Ok I found it. 8th parameter, point 0 Works even better now
Dale

Hey Dave, any updates on your V4 gladiator?

Sorry Joe, real life has got in the way recently, so not had much time for FS stuff.

DaveG wrote: ↑

26 Jan 2019, 16:54

Sorry Joe, real life has got in the way recently, so not had much time for FS stuff.

No problem Dave, not trying to rush you, just curious.

Vc Ten wrote: ↑

14 Jan 2019, 17:40

Yes she works well in P3dv4 But having the same ground handling problems as Joe. Differential toe braking only works slightly The best I can achieve is several hundred yards radius Can't find this tail wheel radius thingy
Edit: Ok I found it. 8th parameter, point 0 Works even better now
Dale

Only just read this ! , try giving a blast of throttle as well as full rudder & toe brake - Tiger Moth technique with tail skid on grass (less the toe brake bit)!
Keith

I've altered the tail wheel angle and added a differential brake entry to the aircraft.cfg. Works fine now.
Also added the gunsight reticule to the VC as well as basic TacPack functionality.
Fixed the electrical problem with the radio & GPS and added a [radios] section so the ATC will work. ( Needed for P3d)
I'll upload the revised packaged later.

I've just uploaded an updated version of the conversion, with the corrections/enhancements mentioned in my previous post.

https://daveg.cbfsim.org/files/Gloster_ ... or_P3d.zip

DaveG wrote: ↑

29 Jan 2019, 19:31

I've just uploaded an updated version of the conversion, with the corrections/enhancements mentioned in my previous post.

https://daveg.cbfsim.org/files/Gloster_ ... or_P3d.zip

Great news! Will test it out as soon as I can but probably wont have time for a couple of days.

Yes thanks Dave
Dale