Any one know what this is??
Need some help with ID??
Moderators: Guru's, The Ministry
Re: Need some help with ID??
Click here to view my aircraft photos at JetPhotos.Net!
Re: Need some help with ID??
Thanks for the quick reply. I won!!! :kissu: :kissu: :kissu:
- petermcleland
- Red Arrows
- Posts: 5201
- Joined: 25 Jul 2004, 10:28
- Location: Dartmouth, Devon
- Contact:
Re: Need some help with ID??
Hi Kimber...I think that might be powered by a combined Turbine Jet engine and a Ram Jet engine ...The French were very keen on Ram Jet developement in those days and their early ramjets like the Leduc 010 were difficult and dangerous to fly as they had to be carried aloft on a conventional aircraft and then launched at altitude...They only had the ramjet which worked fine at speed but would flame out below about 200+ knots so they were always gliders as they came back to land. Your aircraft was combining both types of propulsion so that it could get airborne on its own power then rush around as a ramjet and finally land with normal jet power :flying:
Regards,
http://www.petermcleland.com/
Updated 28/8/2007
My Channel
http://www.youtube.com/user/petermcleland?feature=mhee
http://www.petermcleland.com/
Updated 28/8/2007
My Channel
http://www.youtube.com/user/petermcleland?feature=mhee
Re: Need some help with ID??
If you want one for FS9 or FSX:
http://simviation.com/fsxmilitary17.htm
And Peter is of course ;-) quite correct about the propulsion systems
http://simviation.com/fsxmilitary17.htm
And Peter is of course ;-) quite correct about the propulsion systems
Re: Need some help with ID??
Thanks, pretty neat plane. Flies nice. Wish it had a VC!ianhind wrote:If you want one for FS9 or FSX:
http://simviation.com/fsxmilitary17.htm
And Peter is of course ;-) quite correct about the propulsion systems
HI Peter! :dance: :dance: :dance:
-
- Viscount
- Posts: 112
- Joined: 28 Jun 2004, 22:03
- Location: St. Cloud, MN, US
- Contact:
Re: Need some help with ID??
A French attempt at being Russian, it would seem... :think:
Can't be arsed.