BUNTY aka CIVILIAN COUPE Mk2
Moderators: Guru's, The Ministry
-
- Vintage Pair
- Posts: 2579
- Joined: 10 Jul 2009, 08:33
- Location: Chacombe about 2 mile east of M40 J11
BUNTY aka CIVILIAN COUPE Mk2
Now available for download at Britsim. Bunty_v1.0.zip
YouTube video here : https://youtu.be/cKhyqqrXnmI
Soon to be also available at Flightsim.
Big thank you to Scorpious for the Genet sound file & to Ted Cook for .xml assistance.
Designed for FS9 it will portover to FSX & I understand to P3D, both with the usual caveats.
Now if anyone can get the dsd_fsx sound file to work in FSX..........please let me know I can then update the FSX version
Keith
YouTube video here : https://youtu.be/cKhyqqrXnmI
Soon to be also available at Flightsim.
Big thank you to Scorpious for the Genet sound file & to Ted Cook for .xml assistance.
Designed for FS9 it will portover to FSX & I understand to P3D, both with the usual caveats.
Now if anyone can get the dsd_fsx sound file to work in FSX..........please let me know I can then update the FSX version
Keith
- DaveG
- The Gurus
- Posts: 7782
- Joined: 23 Jun 2004, 18:05
- Location: in a deep, dark hole somewhere.
- Contact:
Re: BUNTY aka CIVILIAN COUPE Mk2
Thanks Keith, downloaded.
Working on it...Dev One wrote:Now if anyone can get the dsd_fsx sound file to work in FSX..........please let me know I can then update the FSX version
Dave G.
-
- Vintage Pair
- Posts: 2579
- Joined: 10 Jul 2009, 08:33
- Location: Chacombe about 2 mile east of M40 J11
Re: BUNTY aka CIVILIAN COUPE Mk2
I had one h**l of a job understanding the linking sequence for the fsx version, I just could not get it to operate the 'Contact' call. You will obviously need to use the FS9 set up to get that bit 'cos I've deleted the .xml for the Left Mag switch.DaveG wrote:Thanks Keith, downloaded.
Working on it...Dev One wrote:Now if anyone can get the dsd_fsx sound file to work in FSX..........please let me know I can then update the FSX version
Hope that hasn't confused you....
Keith
- DaveG
- The Gurus
- Posts: 7782
- Joined: 23 Jun 2004, 18:05
- Location: in a deep, dark hole somewhere.
- Contact:
Re: BUNTY aka CIVILIAN COUPE Mk2
Got the sounds working, having modified the FS9 panel.cfg to call the dsd_fsx_xml_sound gauge, and altered that paths a bit. The sequence seems to work correctly, but the engine doesn't actually start!
This is in P3d, but I'm just going to swap over to FSX and see if it works there.
This is in P3d, but I'm just going to swap over to FSX and see if it works there.
Dave G.
-
- Vintage Pair
- Posts: 2579
- Joined: 10 Jul 2009, 08:33
- Location: Chacombe about 2 mile east of M40 J11
Re: BUNTY aka CIVILIAN COUPE Mk2
I think you will have to try the FS9 panel.cfg & the Bunty starterVC left.xml. The FSX equivalent does not invoke the time delay. You might also need to use the bunty eng1 mag_R1.xml, as this switches both mags off. Only trouble I found is that it doesn't seem to trigger the engine shutdown sound.
If you get the fsx sound gauge working it should work also for FS9 - or so I believe.
Good luck
Keith
If you get the fsx sound gauge working it should work also for FS9 - or so I believe.
Good luck
Keith
- DaveG
- The Gurus
- Posts: 7782
- Joined: 23 Jun 2004, 18:05
- Location: in a deep, dark hole somewhere.
- Contact:
Re: BUNTY aka CIVILIAN COUPE Mk2
Hi Keith,
I used the complete FS9 panel.cfg, rather than the FSX one, only changing the sound gauge entry.
I used the complete FS9 panel.cfg, rather than the FSX one, only changing the sound gauge entry.
Dave G.
-
- Vintage Pair
- Posts: 2579
- Joined: 10 Jul 2009, 08:33
- Location: Chacombe about 2 mile east of M40 J11
Re: BUNTY aka CIVILIAN COUPE Mk2
Ahhh. This morning my brain awoke...I remember that in FSX using the FS9 left mag xml to invoke the time delay before engine start, one had to do a second click once the prop had rotated, this switched off the LH toggle but the engine then fired up because the RH mag was switched on. There must be a slightly different logic built into FSX for engine start than FS9 methinks. One could then reclick the LH toggle to put it to ON without any other change happening.
Keith
Keith
- DaveG
- The Gurus
- Posts: 7782
- Joined: 23 Jun 2004, 18:05
- Location: in a deep, dark hole somewhere.
- Contact:
Re: BUNTY aka CIVILIAN COUPE Mk2
The prop doesn't even turn over. Some changes to the code needed me thinks.
Anyway, as far as the sound gauge goes, these are the changes I made to get them to work.
In the panel.cfg, I changed the gauge02 entry to:
but also had to change the cockpit_sound.ini thus:
Anyway, as far as the sound gauge goes, these are the changes I made to get them to work.
In the panel.cfg, I changed the gauge02 entry to:
Code: Select all
gauge02=dsd_fsx_xml_sound!sound, 0,0,5,5,.\SimObjects\Airplanes\Bunty\Panel\Cockpit_Sounds\Cockpit_Sound.ini
Code: Select all
[Sounds]
Sound00=/Switch_Sound.wav
Sound01=/Aus_starter.wav
Dave G.
-
- Vintage Pair
- Posts: 2579
- Joined: 10 Jul 2009, 08:33
- Location: Chacombe about 2 mile east of M40 J11
Re: BUNTY aka CIVILIAN COUPE Mk2
DaveG, Thank you very much for that, I can now experiment in FSX having got the sound working. Will keep you informed.
Keith
Keith
-
- Vintage Pair
- Posts: 2579
- Joined: 10 Jul 2009, 08:33
- Location: Chacombe about 2 mile east of M40 J11
Re: BUNTY aka CIVILIAN COUPE Mk2
Been experimenting in FSX & can get the engine to start the same way as in FS9. I just cannot stop though the Contact call when switching off that tumbler in both FS9 & FSX. Most annoying as I can get it to say Contact on switch off, without it saying Contact at switch on, so have not found the reverse action that I would like!!!
Cannot get either the dsd_fsx sound to work in FS9, but again thats not a real problem as the older version works OK, but obviously I have been able to confirm DaveG's path method for FSX.
BTW have you seen TuFuns video in P3D over at SoH?
Will update when possible - busy tomorrow in the real world...
Keith
Cannot get either the dsd_fsx sound to work in FS9, but again thats not a real problem as the older version works OK, but obviously I have been able to confirm DaveG's path method for FSX.
BTW have you seen TuFuns video in P3D over at SoH?
Will update when possible - busy tomorrow in the real world...
Keith