COMPER STREAK BETA TESTERS PLEASE
Moderators: Guru's, The Ministry
- blanston12
- Vintage Pair
- Posts: 2755
- Joined: 28 Jun 2004, 20:45
- Location: San Francsico, California
Re: COMPER STREAK BETA TESTERS PLEASE
I downloaded from flightsim.com and gave it a try, the prop disk problem is fixed but the Cockpit_sound.ini not found is still an issue but not really a problem as it still sounds like a piston engine, I don't get the 'contact' sound.
One issue I have with this AC, which is something I was reluctant to mention at first, is something kevin touched when he mentioned that there is no 'definition' to the Throttle and Mixture leavers, its really not just these leavers, that have this issue, its pretty much all the surfaces look over saturated and without much shading. It does look better in FSX than P3D but I think it would look better if things were toned down a little.
One issue I have with this AC, which is something I was reluctant to mention at first, is something kevin touched when he mentioned that there is no 'definition' to the Throttle and Mixture leavers, its really not just these leavers, that have this issue, its pretty much all the surfaces look over saturated and without much shading. It does look better in FSX than P3D but I think it would look better if things were toned down a little.
Joe Cusick,
I am serious, and don't call me Shirley.
I am serious, and don't call me Shirley.
-
- Vintage Pair
- Posts: 2576
- Joined: 10 Jul 2009, 08:33
- Location: Chacombe about 2 mile east of M40 J11
Re: COMPER STREAK BETA TESTERS PLEASE
Joe, I appreciate all comments so that I can hopefully improve my next one. It is only through comments from these forums that one can gain knowledge of how they work for others.
Glad the Prop disc OK now in P3D, but I think DaveG mentioned that P3D does not seem to have the sound.ini, & of course its something I cannot test!
My intention with the throttles etc & fishplates was to leave them as anodised Aluminium or natural stainless & rely purely on the sim graphics to provide shading, must therefore experiment some more, but what I find annoying is that where items are under the cockpit roof they still react as if there is no roof. Is that because I'm working in FS9 I wonder?
Keith
Glad the Prop disc OK now in P3D, but I think DaveG mentioned that P3D does not seem to have the sound.ini, & of course its something I cannot test!
My intention with the throttles etc & fishplates was to leave them as anodised Aluminium or natural stainless & rely purely on the sim graphics to provide shading, must therefore experiment some more, but what I find annoying is that where items are under the cockpit roof they still react as if there is no roof. Is that because I'm working in FS9 I wonder?
Keith
- Airspeed
- Red Arrows
- Posts: 9283
- Joined: 14 Sep 2011, 03:46
- Location: Central Victorian Highlands, Dja Dja Wurrung Country, Australia
- Contact:
Re: COMPER STREAK BETA TESTERS PLEASE
Hi Keith,
Your inclusion of "Contact" in the start sequence has piqued my interest.
I might play with some of my modern GA sounds, and insert "prop clear!" (This, despite my voice not sounding anything like it does on a recorder )
EDIT: I've just located the word in cockpit sounds, I was wondering where it was hiding!
Your inclusion of "Contact" in the start sequence has piqued my interest.
I might play with some of my modern GA sounds, and insert "prop clear!" (This, despite my voice not sounding anything like it does on a recorder )
EDIT: I've just located the word in cockpit sounds, I was wondering where it was hiding!
- Kevin Farnell
- Vintage Pair
- Posts: 2083
- Joined: 26 Jun 2004, 13:29
- Location: Willingham, Cambridge UK.
- Contact:
Re: COMPER STREAK BETA TESTERS PLEASE
Hi Joeblanston12 wrote:I downloaded from flightsim.com and gave it a try, the prop disk problem is fixed but the Cockpit_sound.ini not found is still an issue but not really a problem as it still sounds like a piston engine, I don't get the 'contact' sound.
I get the same message from P3D. This is due to the sound.ini file being in a different location to that which the Panel.cfg file is looking. This happens on many aircraft within P3D if the aircraft is installed outside of the main P3D Simobjects folder.
You can fix it by going into the Panel.cfg file using notepad.
Scroll down to [vcockpit01] and find gauge00
the path needs to be changed from default to the location of the sound.ini file.
From your previous post regarding the error, you must have installed the Comper Streak in -
c:\users\joe\Custom_aircraft\SimObjects\Airplanes
You can fix it by going into the Panel.cfg file using notepad.
Scroll down to [vcockpit01] and find gauge00
the path needs to be changed from default to the location of the sound.ini file.
In your case this will be from
gauge00=dsd_fsx_xml_sound!sound, 0,0,5,5,.\SimObjects\Airplanes\Comper Streak\Panel\Cockpit_Sounds\Cockpit_Sound.ini
to
gauge00=c:\users\joe\Custom_aircraft\SimObjects\Airplanes\Comper Streak\panel\dsd_fsx_xmk_sound.ini
I'm not certain that this will fix the 'Contact' announcement, but it will stop you getting the error message.
Regards
Kevin
Stratospheric traces, of our transitory flight.
Trails of condensation, held in narrow paths of white...
Trails of condensation, held in narrow paths of white...
-
- Vintage Pair
- Posts: 2576
- Joined: 10 Jul 2009, 08:33
- Location: Chacombe about 2 mile east of M40 J11
Re: COMPER STREAK BETA TESTERS PLEASE
Hmmm, surely the call 'Clear Prop' is used when the aircraft has a self starter as opposed to the call 'Contact' which would ideally activate before the switch toggle moves, as called by the Prop swinger. Needs some sort of delay in reverse to what I've programmed!Airspeed wrote:Hi Keith,
Your inclusion of "Contact" in the start sequence has piqued my interest.
I might play with some of my modern GA sounds, and insert "prop clear!" (This, despite my voice not sounding anything like it does on a recorder )
EDIT: I've just located the word in cockpit sounds, I was wondering where it was hiding!
Keith
- Airspeed
- Red Arrows
- Posts: 9283
- Joined: 14 Sep 2011, 03:46
- Location: Central Victorian Highlands, Dja Dja Wurrung Country, Australia
- Contact:
Re: COMPER STREAK BETA TESTERS PLEASE
I wasn't criticising your sound set, Keith.
When I was doing lessons, we called "Prop clear" through the open clearview just before turning the starter switch.
I can understand the difference between the two calls, and why the prop turner needs to know that magnetos are on.
I was suggesting that I add it to modern GA, so I agree, it would relate to electric starters.
Hope this clears any misunderstanding.
When I was doing lessons, we called "Prop clear" through the open clearview just before turning the starter switch.
I can understand the difference between the two calls, and why the prop turner needs to know that magnetos are on.
I was suggesting that I add it to modern GA, so I agree, it would relate to electric starters.
Hope this clears any misunderstanding.
-
- Vintage Pair
- Posts: 2576
- Joined: 10 Jul 2009, 08:33
- Location: Chacombe about 2 mile east of M40 J11
Re: COMPER STREAK BETA TESTERS PLEASE
Mike, no offence taken, its just a pity that one cannot type with a voice pattern that sounds tongue in cheek.........
I suppose in the Northern hemisphere the call is 'Clear Prop' whilst in the southern it would be the reverse ...is this the Coriolis effect I wonder?
Keith
I suppose in the Northern hemisphere the call is 'Clear Prop' whilst in the southern it would be the reverse ...is this the Coriolis effect I wonder?
Keith
- Airspeed
- Red Arrows
- Posts: 9283
- Joined: 14 Sep 2011, 03:46
- Location: Central Victorian Highlands, Dja Dja Wurrung Country, Australia
- Contact:
Re: COMPER STREAK BETA TESTERS PLEASE
It's probably more likely my memory failing.
It was 20 years ago, and I only had about 6 lessons.
It was 20 years ago, and I only had about 6 lessons.
- blanston12
- Vintage Pair
- Posts: 2755
- Joined: 28 Jun 2004, 20:45
- Location: San Francsico, California
Re: COMPER STREAK BETA TESTERS PLEASE
Just though I would post some screen shots so you can see what it looks like to me.
FSX, Exterior:
FSX Interior:
P3D Exterior:
P3d Interior:
FSX, Exterior:
FSX Interior:
P3D Exterior:
P3d Interior:
Joe Cusick,
I am serious, and don't call me Shirley.
I am serious, and don't call me Shirley.
-
- Vintage Pair
- Posts: 2576
- Joined: 10 Jul 2009, 08:33
- Location: Chacombe about 2 mile east of M40 J11
Re: COMPER STREAK BETA TESTERS PLEASE
Joe, Thank you for those shots, I can now see (but not understand) your problem in P3D. It seems to be very bland & my attempt at darkening the interior in order to try to provide some shade appears to have the opposite effect, or maybe its the alpha layer?
Regards
Keith
Regards
Keith