Peters Paints!
Moderators: Guru's, The Ministry
Re: Peters Paints!
Cheers Graham. Last four paints done. I have broken my usual code and done a fictitious scheme for a Royal Canadian Navy Sea Hornet, for which I beg forgiveness! PX284 is up at Flightsim.com now, the others will be tomorrow pm.
Re: Peters Paints!
OK, I think 20 Hornets is enough! Have just uploaded a Hunting President paint for Rob's Pembroke C54:
- Airspeed
- Red Arrows
- Posts: 9303
- Joined: 14 Sep 2011, 03:46
- Location: Central Victorian Highlands, Dja Dja Wurrung Country, Australia
- Contact:
Re: Peters Paints!
I've always liked the look of the Pembroke, and I like the twin Alvinides sound file.
Will have to check the hangar and see if I need any more paints. Thanks Peter!
Will have to check the hangar and see if I need any more paints. Thanks Peter!
-
- Concorde
- Posts: 1037
- Joined: 12 Aug 2008, 15:58
- Location: Alconbury Weston, UK
Re: Peters Paints!
Peter, that looks superb, you really are breathing new life into some old models.
The new Hornet paints bring it to a completely new level, just love the textures and weathering.
By coincidence I rolled the Pembroke out of retirement this very morning for a
low and slow flight around my new Netherlands scenery, just got to have that new scheme when its ready!
RobR
The new Hornet paints bring it to a completely new level, just love the textures and weathering.
By coincidence I rolled the Pembroke out of retirement this very morning for a
low and slow flight around my new Netherlands scenery, just got to have that new scheme when its ready!
RobR
Last edited by robcarrich on 26 Apr 2018, 21:54, edited 1 time in total.
Re: Peters Paints!
Beautiful paint on the Pembroke, Peter.
Brian
Brian
Re: Peters Paints!
Thanks Guys. The Pembroke is one of my favourites too and I got fed up with only having G-APMO to fly in civvies!
Rob I could not see the C54 on your site so you might have a few people asking for it now! I was going to ask about the Sea Prince but as the Pembroke was one of your FSDS creations I did not hold out any hope with you moving to Blender. No worries though!
Peter
Rob I could not see the C54 on your site so you might have a few people asking for it now! I was going to ask about the Sea Prince but as the Pembroke was one of your FSDS creations I did not hold out any hope with you moving to Blender. No worries though!
Peter
-
- Concorde
- Posts: 1037
- Joined: 12 Aug 2008, 15:58
- Location: Alconbury Weston, UK
Re: Peters Paints!
I had better put C54 back up, at the double!MilesMan wrote: ↑26 Apr 2018, 19:00Thanks Guys. The Pembroke is one of my favourites too and I got fed up with only having G-APMO to fly in civvies!
Rob I could not see the C54 on your site so you might have a few people asking for it now! I was going to ask about the Sea Prince but as the Pembroke was one of your FSDS creations I did not hold out any hope with you moving to Blender. No worries though!
Peter
No Sea Prince Peter, I cant even remember how to start FSDS!
Rob
- blanston12
- Vintage Pair
- Posts: 2765
- Joined: 28 Jun 2004, 20:45
- Location: San Francsico, California
Re: Peters Paints!
Hi Rob, I took the Pembroke out today and am reminded how much I liked it.robcarrich wrote: ↑26 Apr 2018, 15:29Peter, that looks superb, you really are breathing new life into some old models.
The new Hornet paints bring it to a completely new level, just love the textures and weathering.
By coincidence I rolled the Pembroke out of retirement this very morning for a
low and slow flight around my new Netherlands scenery, just got to have that new scheme when its ready!
RobR
I did notice once tiny issue with the manifold pressure gauge in that it never reaches 15 even though the red-line is at 30.
I tested it in both FSX and P3D4 with the same behavior.
Joe Cusick,
I am serious, and don't call me Shirley.
I am serious, and don't call me Shirley.
-
- Concorde
- Posts: 1037
- Joined: 12 Aug 2008, 15:58
- Location: Alconbury Weston, UK
Re: Peters Paints!
Joe, you need to find a good optician if that's the only fault you can findHi Rob, I took the Pembroke out today and am reminded how much I liked it.
I did notice once tiny issue with the manifold pressure gauge in that it never reaches 15 even though the red-line is at 30.
I tested it in both FSX and P3D4 with the same behavior.
I do use the term "not accurate" when describing the models on my site.
But you are quite right the reading is low.
If you go into the aircraft cfg.file in the [piston engine] section find "max_design_mp= 100" change to this value.
By the way Joe, behaviour is spelt behaviour not behavior
RobR
Re: Peters Paints!
robcarrich wrote: ↑27 Apr 2018, 07:28By the way Joe, behaviour is spelt behaviour not behavior RobR
I had never realised before that this forum was also educational.
Graham