Prepare 3D Version 5
Moderators: Guru's, The Ministry
- DaveG
- The Gurus
- Posts: 7771
- Joined: 23 Jun 2004, 18:05
- Location: in a deep, dark hole somewhere.
- Contact:
Re: Prepare 3D Version 5
Couldn't agree more Ben, it's an excellent package. I think there's going to be another update soon as he's been previewing done screenshots over at FSDeveloper recently. There's going to be some retro stuff in there including a complete Falklands taskforce (with my Fearless/Intrepid).
Dave G.
-
- Concorde
- Posts: 649
- Joined: 24 May 2008, 07:52
Re: Prepare 3D Version 5
Purchased V5. Just wanted to give my experiences.
Got a bad download which failed to install. had to download again.
Once installed...
Cannot import controls from 4.5 to 5. Annoying but not the end of the world.
Flying default aircraft with settings as I would fly in V4.5 using VR.
All works okay. Not seeing any real difference over 4.5 with occulus rift.
Loading third party aircraft from 4.5 to 5. Causes sim to hang when selecting and ctd.
Loading third party scenery (Gen X) causes ctd at loading screen.
Turning on beta settings. Won't work in VR. Turning on stereo mode causes major stutters.
So it's a no go from me. Requesting refund.
If i'm going to loose all my third party content and have no VR improvements I may as well wait for 2020.
Ted.
Got a bad download which failed to install. had to download again.
Once installed...
Cannot import controls from 4.5 to 5. Annoying but not the end of the world.
Flying default aircraft with settings as I would fly in V4.5 using VR.
All works okay. Not seeing any real difference over 4.5 with occulus rift.
Loading third party aircraft from 4.5 to 5. Causes sim to hang when selecting and ctd.
Loading third party scenery (Gen X) causes ctd at loading screen.
Turning on beta settings. Won't work in VR. Turning on stereo mode causes major stutters.
So it's a no go from me. Requesting refund.
If i'm going to loose all my third party content and have no VR improvements I may as well wait for 2020.
Ted.
Last edited by DogTailRed2 on 10 May 2020, 17:35, edited 1 time in total.
- spatialpro
- Concorde
- Posts: 663
- Joined: 10 Apr 2007, 20:18
- Location: Wessex
Re: Prepare 3D Version 5
I'd be very grateful to know 1) your settings; and 2) your PC specs please Ted?DogTailRed2 wrote: ↑10 May 2020, 14:33Turning on beta settings. Won't work in VR. Turning on stereo mode causes major stutters.
I also suffered severe stutters at the outset, but after routing around and re-learning things (I'd forgotten a lot of VR requirements and settings since I first installed v4) I've now got it in a much more usable state. DaveG also helped me a lot by answering my questions and providing suggestions. Thanks Dave! Before I jump into VR I really focus (pun?!) on getting >90FPS, as I know it is fruitless otherwise.
Re: advanced atmospherics vs. stereo, I think there is a good chance the former will cease to be a beta and hopefully also become available in mono (which would bring a welcome FPS boost)
Formerly "Airtrooper"
i9-10900KF, 64Gb RAM,
RTX 3090, HP Reverb G2, Win10 Pro 64-bit
Saitek Combat Rudder Pedals, Saitek X52 Pro
-
- Concorde
- Posts: 649
- Joined: 24 May 2008, 07:52
Re: Prepare 3D Version 5
PC settings off the top of my head are;Airtrooper wrote: ↑10 May 2020, 15:12I'd be very grateful to know 1) your settings; and 2) your PC specs please Ted?DogTailRed2 wrote: ↑10 May 2020, 14:33Turning on beta settings. Won't work in VR. Turning on stereo mode causes major stutters.
I also suffered severe stutters at the outset, but after routing around and re-learning things (I'd forgotten a lot of VR requirements and settings since I first installed v4) I've now got it in a much more usable state. DaveG also helped me a lot by answering my questions and providing suggestions. Thanks Dave! Before I jump into VR I really focus (pun?!) on getting >90FPS, as I know it is fruitless otherwise.
Re: advanced atmospherics vs. stereo, I think there is a good chance the former will cease to be a beta and hopefully also become available in mono (which would bring a welcome FPS boost)
Intel i7 4ghz Quad. 32gb RAM. SSD's.
Occulus Rift CV1.
GFX 1070ti 8gb.
Game settings. I set everything in the middle to high settings. In V4.5 I run everything maxed without issues but I don't have much autogen.
I set FPS to 30.
When I fly VR in 4.5 with gfx settings maxed I get smooth gameplay even with VFR London.
- spatialpro
- Concorde
- Posts: 663
- Joined: 10 Apr 2007, 20:18
- Location: Wessex
Re: Prepare 3D Version 5
Many thanks Ted
FWIW for anyone out there, I found setting unlimited FPS and forcing Asynchronous SpaceWarp (ASW) off (I used the Oculus Tray Tool) worked wonders.
FWIW for anyone out there, I found setting unlimited FPS and forcing Asynchronous SpaceWarp (ASW) off (I used the Oculus Tray Tool) worked wonders.
Formerly "Airtrooper"
i9-10900KF, 64Gb RAM,
RTX 3090, HP Reverb G2, Win10 Pro 64-bit
Saitek Combat Rudder Pedals, Saitek X52 Pro
Re: Prepare 3D Version 5
Hi Ted,
I’ve no issues at all with the GenX scenery and the UK2000 and ScotFlight addons in v5. I did have problems with so AI (ships and aircraft) causing CTD and some of my old scenery that I had converted years ago using MCX.
I’ve no issues at all with the GenX scenery and the UK2000 and ScotFlight addons in v5. I did have problems with so AI (ships and aircraft) causing CTD and some of my old scenery that I had converted years ago using MCX.
Ben.
-
- Concorde
- Posts: 649
- Joined: 24 May 2008, 07:52
Re: Prepare 3D Version 5
Hmmm. All I did was point V5 at GenX vol 1 scenery area (same as V4.5) and as soon as I loaded the sim it ctd'd?
Any ideas?
Re: Prepare 3D Version 5
I’m doing the same mate, and that’s with all of the GenX stuff loaded. What airport did you start the sim at when it crashed? Do you have any AI loaded?
Ben.