Awesome updates!
Moderators: Guru's, The Ministry
-
- Chipmunk
- Posts: 24
- Joined: 06 Dec 2005, 18:55
- Location: Deployed
Mr. Maltby,
Just took the BAC 1-11 for my check rides and she flys like a dream!! 4 circuits @ Edinburgh 2 day and 2 night. Who needs the AP on this thing? Absolutely enjoyable, thank you again!
Jonathan
Just took the BAC 1-11 for my check rides and she flys like a dream!! 4 circuits @ Edinburgh 2 day and 2 night. Who needs the AP on this thing? Absolutely enjoyable, thank you again!
Jonathan
Hovercontrol Instructor Pilot
Creator, BellFest
Virtual Trident Driver
Welcome to my Sky
"Carpe Speedum"
Creator, BellFest
Virtual Trident Driver
Welcome to my Sky
"Carpe Speedum"
- Kevin Farnell
- Vintage Pair
- Posts: 2083
- Joined: 26 Jun 2004, 13:29
- Location: Willingham, Cambridge UK.
- Contact:
Thanks Dave,
Wonderful work, yet again.
I do however seem to have one small problem. The panel views and VC flash (ie the textures darken), in unison with the strobe.
I've tried a manual install and also deleted all the One-Eleven files, then reinstalled.
I still see the same effect.
Is anyone else experiencing this?
Regards
Kevin
Wonderful work, yet again.
I do however seem to have one small problem. The panel views and VC flash (ie the textures darken), in unison with the strobe.
I've tried a manual install and also deleted all the One-Eleven files, then reinstalled.
I still see the same effect.
Is anyone else experiencing this?
Regards
Kevin
-
- Victor
- Posts: 242
- Joined: 02 Aug 2006, 15:52
- Location: Seneca, SC USA about as far NW in South Carolina as you can get.
- DaveB
- The Ministry
- Posts: 30457
- Joined: 17 Jun 2004, 20:46
- Location: Pelsall, West Mids, UK
- Contact:
Hi Kevin,
I don't yet have the latest 1-11 (at least I don't think so) but I've run the new Trident quite a bit and don't see that mate. There are occassions (on initial draw) when the VC is black and takes a few moments to load the textures up but definately nothing any worse than this. Does it happen all the time or just when you're in cloud or at night??
ATB
DaveB :tab:
I don't yet have the latest 1-11 (at least I don't think so) but I've run the new Trident quite a bit and don't see that mate. There are occassions (on initial draw) when the VC is black and takes a few moments to load the textures up but definately nothing any worse than this. Does it happen all the time or just when you're in cloud or at night??
ATB
DaveB :tab:
Old sailors never die.. they just smell that way!
- Kevin Farnell
- Vintage Pair
- Posts: 2083
- Joined: 26 Jun 2004, 13:29
- Location: Willingham, Cambridge UK.
- Contact:
Hi Dave
The effect that I am seeing is a definite flashing (darkening) of the textures of the panel views and VC, consistent with the timing of the beacon. The 2D panel is not effected, only the panel views. If I switch off the beacon, the effect stops.
Now for the strange part...
I started up FS9.1, with BAC One-Eleven 400, Birmingham European as my chosen aircraft.
The engines were running, but all lights off. On starting the beacon, the effect started.
I switched aircraft to One-Eleven 500, BEA red square - no flashing effect. I switched views to outside the aircraft, and confirmed that the beacon was operating.
Back in the cockpit, I switched off then on the beacon. The flashing textures returned.
I have tried this several times, switching between different One-Elevens and always get the same thing happen.
Am I doing anything wrong with the start up? i.e. not from cold and dark.
Regards
Kevin
PS the effect is even more pronounced at night.
The effect that I am seeing is a definite flashing (darkening) of the textures of the panel views and VC, consistent with the timing of the beacon. The 2D panel is not effected, only the panel views. If I switch off the beacon, the effect stops.
Now for the strange part...
I started up FS9.1, with BAC One-Eleven 400, Birmingham European as my chosen aircraft.
The engines were running, but all lights off. On starting the beacon, the effect started.
I switched aircraft to One-Eleven 500, BEA red square - no flashing effect. I switched views to outside the aircraft, and confirmed that the beacon was operating.
Back in the cockpit, I switched off then on the beacon. The flashing textures returned.
I have tried this several times, switching between different One-Elevens and always get the same thing happen.
Am I doing anything wrong with the start up? i.e. not from cold and dark.
Regards
Kevin
PS the effect is even more pronounced at night.
- Garry Russell
- The Ministry
- Posts: 27180
- Joined: 29 Jan 2005, 00:53
- Location: On the other side of the wall
- Kevin Farnell
- Vintage Pair
- Posts: 2083
- Joined: 26 Jun 2004, 13:29
- Location: Willingham, Cambridge UK.
- Contact:
- Kevin Farnell
- Vintage Pair
- Posts: 2083
- Joined: 26 Jun 2004, 13:29
- Location: Willingham, Cambridge UK.
- Contact:
I've heard this one before, but it's not something I've ever seen myself.
I am wondering if it was you though Kevin. It was someone on this forum.
If the beacon effect is messing about with the textures, I'd look at the 'fx_beaconh' effect & maybe change it for something else.
Is it a non-standard version of the effect maybe? For a reference, the one I have is dated 09/08/2001.
I'd also check in the old Trident model & see if it's using the same lighting effect for the beacon in aircraft.cfg
Another possibility is graphics driver fault.
Is it only the panels with gauges that flash?
Or is it the side textures as well?
DM
I am wondering if it was you though Kevin. It was someone on this forum.
If the beacon effect is messing about with the textures, I'd look at the 'fx_beaconh' effect & maybe change it for something else.
Is it a non-standard version of the effect maybe? For a reference, the one I have is dated 09/08/2001.
I'd also check in the old Trident model & see if it's using the same lighting effect for the beacon in aircraft.cfg
Another possibility is graphics driver fault.
Is it only the panels with gauges that flash?
Or is it the side textures as well?
DM
Awesome updates
Recently downloaded Dave's update for the BAC 1-11-500,I love it.No problems with it even on my modest pc.Thanks Dave.Best Wishes EricT
Now at the age where I know I like girls but can't remember why!