Page 2 of 3

Re: beaufsx help

Posted: 30 May 2010, 15:01
by TSR2
Depends on where you install FSX Garry. You can change CFG files without problem if they are in your profile, however if they are in a system directory, you'll need to right click and do "run as administrator" you don't actually need to switch UAC off, you just right click and select run as administrator... simples :)

Re: beaufsx help

Posted: 30 May 2010, 15:22
by Garry Russell
In effect.like a lot of things, a bit of planning at the early stages saves loads of hassle :)

Re: beaufsx help

Posted: 30 May 2010, 15:24
by GHD
If the aircraft is not in the selection window, it usually means that there isn't a panel folder.

George

Re: beaufsx help

Posted: 30 May 2010, 15:42
by DaveB
That's right George ;)

Did you get the model from here laz7575?

ATB

DaveB B)smk

Re: beaufsx help

Posted: 30 May 2010, 15:53
by TSR2
Chaps I took it to mean Laz could select the aircraft, but it wasn't showing in the preview pane? *-)

Re: beaufsx help

Posted: 30 May 2010, 17:45
by DaveB
Hi Ben :hello:

I'd not considered that but yes, it could be what he means. Have you ever seen that happen?? :dunno: *-)

ATB

DaveB B)smk

Re: beaufsx help

Posted: 30 May 2010, 18:01
by GHD
DaveB wrote:I'd not considered that but yes, it could be what he means. Have you ever seen that happen??
The Beaufighter makes use of a fallback texture. Ensure that there is a texture.cfg in the selected aircraft's texture folder.

George

Re: beaufsx help

Posted: 03 Jun 2010, 07:59
by MountcookATR
Hi,

Im new here and I was wondering if any could help me with a Beaufighter problem - When I click the supercharger gear change lever only the right engine has an increase in boost and there is a massive yaw to the left. I think I have tried almost everything such as throttling the engines back up and down, loading it over the default FSX flight, but nothing seems to work?

Any help here would be much appreciated.

Cheers, :cheers:
Craig Tatley

Re: beaufsx help

Posted: 03 Jun 2010, 13:56
by DaveB
Hi Craig and welcome ;)

I've had a look at my Beau and the only thing I notice is that the port set of levers move individually (you have to move them both) and the stbd set work together. Other than that, I didn't notice any difference in pwr between the engines. Maybe DG has had this one flagged and can be of some assistance :)

Oh.. what OS are you running and what level is FSX at (eg, SP1, SP2, Accel) ;)

ATB

DaveB B)smk

Re: beaufsx help

Posted: 04 Jun 2010, 07:15
by MountcookATR
Hi,

What do you mean by port set and starboard set-the s/c levers are on the port side?
I run FSX Accel., Win.7 32, 4gb DDR2, Nvdia 9600GT 512mb.

Cheers,
Craig Tatley