Page 11 of 21
Re: WIP: De Havilland DH.125 for FSX/P3D
Posted: 09 Jun 2014, 16:11
by cdp44
Is there any way to make this work in FSX SP2? I´ve commented out the radar gauge, but as soon as the flight loads, the plane starts to bounce on the runway. As far as I know SP2 should be the same as Acc., but without the extra stuff (planes and such).
Tom
Re: WIP: De Havilland DH.125 for FSX/P3D
Posted: 09 Jun 2014, 16:22
by Dev One
I think Rob has posted an update for the MoI in the aircraft.cfg values which is supposed to stop it for those that have a problem. It is over at SOH.
I have a problem with the gauges as it seems that the FA-18.dll is not recognised on my system. I cannot even get the FA-18 model to show its gauges.
HTH
Keith
Re: WIP: De Havilland DH.125 for FSX/P3D
Posted: 09 Jun 2014, 17:35
by DaveG
TBH, I think the contact points are a bit odd. The damping ratio is set at 5.6 for the nose wheel and 11.99 for the main gear. Values should normally be between 0 and 1.
I've dropped mine down to 0.9 and 0.54 respectively (values taken from the default Lear) and that seems fine.
Re: WIP: De Havilland DH.125 for FSX/P3D
Posted: 09 Jun 2014, 18:48
by cdp44
DaveG, you sir are a life saver
, that fixed it. Thank you.
Tom
Re: WIP: De Havilland DH.125 for FSX/P3D
Posted: 10 Jun 2014, 13:17
by Erich
Excellent news that it is useable in P3Dv2.2. I have waited for the 125 for years - and it's freeware!
Can anyone comment on what the sounds are like. Is it an authentic version of the actual engine sound of the time ?
Regards
Erich
Re: WIP: De Havilland DH.125 for FSX/P3D
Posted: 10 Jun 2014, 13:52
by Scorpius
The sounds are authentic, I have spoken to the chap that did them although he tells me he is going to tweek them for P3DV2.
Nev
Re: WIP: De Havilland DH.125 for FSX/P3D
Posted: 10 Jun 2014, 13:58
by Erich
Thanks Nev. From what I remember as a kid, those engines were NOISY. Are the transition sounds well captured through the entire power range?
Re: WIP: De Havilland DH.125 for FSX/P3D
Posted: 10 Jun 2014, 14:55
by Scorpius
The sounds are as accurate as can be achieved and were sampled from a variety of viper engined aircraft including the Dominie as well as static engine runs. The internal cockpit sounds are solely from the Dominie.
Nev
Re: WIP: De Havilland DH.125 for FSX/P3D
Posted: 10 Jun 2014, 15:15
by Erich
Scorpius wrote:The sounds are as accurate as can be achieved and were sampled from a variety of viper engined aircraft including the Dominie as well as static engine runs. The internal cockpit sounds are solely from the Dominie.
Nev
That's brilliant. An accurate sound version on this aircraft is a must. Can't wait to download it.
Re: WIP: De Havilland DH.125 for FSX/P3D
Posted: 11 Jun 2014, 15:23
by grumpyoldb
The first Dominie T1 texture is now on All Nodes.