Page 3 of 3
Re: Need an AFCAD expert for FSX
Posted: 15 Jan 2010, 10:55
by TSR2
Hi Rick,
Shouldn't be any problems with the UK2000 stuff (That is his current product for FSX, not the old FS parts 1 -

The file I sent you last nightworks as expected with this product set.
Re: Need an AFCAD expert for FSX
Posted: 15 Jan 2010, 11:03
by Rick Piper
Hi Ben
Problem here is i am testing a lot of Earthsim stuff with different AFCADs at st mary's etc
so they never complete
Regards
Rick
Re: Need an AFCAD expert for FSX
Posted: 15 Jan 2010, 11:08
by TSR2
Rgr that mate, just pointing out that the UK2000 stuff thats' been released is fine

Re: Need an AFCAD expert for FSX
Posted: 15 Jan 2010, 11:19
by DanKH
Rick Piper wrote:Hi Dan
I keep finding that UK2000 Afcads and others have non connected nodes
driving me Ga Ga getting it all working
Regards
Rick
Using the ADE to check the AFCADs has a very good error checking, and that would quickly tell you if you have disconnected nodes...
Is should be illegal to release an afcad without running it through an error check first ...!

At least to confirm that any disconnected nodes are on purpose and not accidental
Re: Need an AFCAD expert for FSX
Posted: 15 Jan 2010, 19:39
by GHD
Hi Rick,
There is nothing wrong with any of the afcads for VFR Airfields vols 1 & 2.
Send me your files and I will check them.
George
Re: Need an AFCAD expert for FSX
Posted: 19 Jan 2010, 17:57
by tgibson
Hi,
Check the wingspan value in the plane's aircraft.cfg file. The parking spots there must have a radius greater than half of that value or they won't park there.
Hope this helps,