Page 1 of 2
Trident at Hong Kong
Posted: 03 Feb 2008, 10:01
by speedbird591
Re: Trident at Hong Kong
Posted: 03 Feb 2008, 10:52
by airboatr
-
Re: Trident at Hong Kong
Posted: 03 Feb 2008, 11:11
by Garry Russell
Nice shots Ian
Thanks for that
Garry
Re: Trident at Hong Kong
Posted: 03 Feb 2008, 12:19
by RAF_Quantum
Very nice

Re: Trident at Hong Kong
Posted: 03 Feb 2008, 16:16
by nigelb
airboatr wrote:
that traffic controlling add on sure cleans things up , I just wish I had a way to keep the green info bar from popping up.
Joe
If your talking about AISmooth, try changing the settings. Click on "File" in the top left corner, select Settings and then remove the tick mark from "show ATC messages"
Re: Trident at Hong Kong
Posted: 03 Feb 2008, 16:25
by airboatr
-
Re: Trident at Hong Kong
Posted: 03 Feb 2008, 16:47
by Nigel H-J
Well done Ian, you made it smack on the centre line. Something which I find somewhat challenging!!
Great shots as well.
Nigel.
Re: Trident at Hong Kong
Posted: 03 Feb 2008, 23:36
by speedbird591
Thanks guys. Special thanks to Nigel B for the tip about the AI Smooth banner - like Joe, I hadn't read the manual
For Nigel H_J and anybody else who finds the final turn a bit challenging. The secret is to ensure that the you have the audio switch on the radio selected ON for "marker". As you reach the middle marker, which is the point at which the approach lights start to curve, you will get an audible beeper. If you are in a large aircraft (747) you should begin your turn immediately, the smaller the aircraft the later you leave it. Try waiting two to three seconds in a VC10 before beginning the turn. Note where the approach lights are in your windscreen and keep them at the same place as you bank and you will find yourself straightening up at the right place. Of course, you will have taken your eyes off the speed and the rate of descent, but at least you'll be over the centreline as you do your go-around
There are different ways of attacking the curve. One way is to approach the middle marker to the left of the ILS beam, leave the turn longer and then do a steep turn to straighten up earlier to allow room for corrections. Or you can fly the beam, turn on the marker and keep the aircraft inside the approach lights, allowing it to drift out to the centreline as you straighten up. The latter was the usual practice for BOAC and BA pilots when I was on the jump seat and that's generally how I try to fly it in the sim. At least if you have the audible marker, you have a reference point from which to practise the approach and see what works best for you. I know Tonks flies this approach in the C1K simulator so if he drops by perhaps he can give us some professional tips.
Ian

Re: Trident at Hong Kong
Posted: 05 Feb 2008, 01:43
by Nigel H-J
Many thanks Ian, I thought that was a professional tip you were giving!!
Nigel.
Re: Trident at Hong Kong
Posted: 05 Feb 2008, 11:48
by speedbird591
Nigel H-J wrote:Many thanks Ian, I thought that was a professional tip you were giving!!
Ah yes! All that leadership and management training that BA gave me wasn't wasted then, Nigel

The secret is to make it appear as though you know what you're talking about and then deliver your opinions assertively!
I mean, really, what the f*** do I know about landing a jet at KaiTak?
Ian