Improved detection for landing light penalty
Posted: 04 Oct 2008, 11:28
Hi Guys,
I've just got my head around how the newer versions of the client reads your altitude for determining a landing light penalty. The penalty criteria haven't changed, but improvements have been made to avoid a penalty in certain circumstances. In previous version of the client you would get a landing light penalty if your aircraft 'jumped' whilst on the ground due to scenery conflicts and there was always a problem when operating into high elevation airfields where the FL100 (10,000ft standard alt setting) rule clashed with the 1000ft AGL rule. This improved 'detection' should avoid those two previous problem areas.
1. To address the aircraft 'jumping' issue.
On departure the client will not log you as airborne until achieving 50ft AGL altitude.
2. To allow operation into high elevation airfileds.
When your altitiude AGL is below 3000ft AGL the penalty detection for lights on above FL100 is ignored/switched off. For example, if landing at an airport with an elevation of 10,000ft, once you get below 3000ft AGL you will be able to turn on your landing lights even though you are still above FL100. In theory his will give you a 2000ft window of opportunity to turn your lights on before descending to below 1000ft AGL. You still have to be aware of the terrain profile around the airport in case a deep valley suddenly increases your altitude AGL to above 3000ft.
The actual rules themselves have not changed. You must have your lights on when below 1000ft AGL and you must have your lights off above FL100. In previous versions of the client there was generous leeway regards the FL100 rule. I don't know the exact figure now, but it has been reduced to about 300ft .
Regards
John
I've just got my head around how the newer versions of the client reads your altitude for determining a landing light penalty. The penalty criteria haven't changed, but improvements have been made to avoid a penalty in certain circumstances. In previous version of the client you would get a landing light penalty if your aircraft 'jumped' whilst on the ground due to scenery conflicts and there was always a problem when operating into high elevation airfields where the FL100 (10,000ft standard alt setting) rule clashed with the 1000ft AGL rule. This improved 'detection' should avoid those two previous problem areas.
1. To address the aircraft 'jumping' issue.
On departure the client will not log you as airborne until achieving 50ft AGL altitude.
2. To allow operation into high elevation airfileds.
When your altitiude AGL is below 3000ft AGL the penalty detection for lights on above FL100 is ignored/switched off. For example, if landing at an airport with an elevation of 10,000ft, once you get below 3000ft AGL you will be able to turn on your landing lights even though you are still above FL100. In theory his will give you a 2000ft window of opportunity to turn your lights on before descending to below 1000ft AGL. You still have to be aware of the terrain profile around the airport in case a deep valley suddenly increases your altitude AGL to above 3000ft.
The actual rules themselves have not changed. You must have your lights on when below 1000ft AGL and you must have your lights off above FL100. In previous versions of the client there was generous leeway regards the FL100 rule. I don't know the exact figure now, but it has been reduced to about 300ft .
Regards
John