DH9 FSX Mixture

Classic British Flight Sim forum.
Support for Maltby/Piper FS models & other Classic British freeware.

Moderators: Guru's, The Ministry

Post Reply
PaulC
VC10
VC10
Posts: 566
Joined: 28 Nov 2009, 15:05
Location: Oakworth, West Yorkshire

DH9 FSX Mixture

Post by PaulC »

Hello All,

Can I just say that the new FSX DH9 is fantastic, thanks DG!!

I have a question about it though. When I get up to a cruise, normally about 4500, 5000' once I'm clear of contolled space, I adjust the mixture, watch the rev counters to know when I'm at the right mix and... nothing seems to happen.

Is it me (probably is, I know! :doh: ) or do I need to be looking somewhere else. I know some aircraft are best leaned using the Cylinder Head temperature.

Thanks a lot,

Paul

User avatar
Garry Russell
The Ministry
Posts: 27180
Joined: 29 Jan 2005, 00:53
Location: On the other side of the wall

Re: DH9 FSX Mixture

Post by Garry Russell »

I take it you mean DH.89? *-) :S
Garry

Image

"In the world of virtual reality things are not always what they seem."

PaulC
VC10
VC10
Posts: 566
Joined: 28 Nov 2009, 15:05
Location: Oakworth, West Yorkshire

Re: DH9 FSX Mixture

Post by PaulC »

Sorry. I can only concentrate on one thing at once, I nearly suffocated writing this!!

User avatar
DaveB
The Ministry
Posts: 30457
Joined: 17 Jun 2004, 20:46
Location: Pelsall, West Mids, UK
Contact:

Re: DH9 FSX Mixture

Post by DaveB »

:lol: :lol: :lol:

There are two possible scenarios for the Rapides mixture.. RICH or WEAK. Furthermore, depending on the operator, this could be cut to one option.. RICH :) If I can give 2 examples from documentation I hold, BEA wire-locked the mixture control to RICH as far back as the early 60's leaving the pilot to fly by RPM alone. Coming closer to home, Air Atlantique specify RICH for everything.. there is no mention in their SOP's of WEAK so it's safe to assume that WEAK is not used at all. AA fly using RPM as an measure of speed and fuel consumption.

Somewhere along the line, WEAK has been removed from operation manuals so use it at your peril :lol: Best guess is that you'll be running one minute and not the next ;)

ATB
DaveB B)smk
ImageImage
Old sailors never die.. they just smell that way!

User avatar
DaveG
The Gurus
Posts: 7754
Joined: 23 Jun 2004, 18:05
Location: in a deep, dark hole somewhere.
Contact:

Re: DH9 FSX Mixture

Post by DaveG »

Hi Paul,

the mixture should work ok, although it is limited by hidden code so the mixture levers cannot advance past the throttle levers.
Dave G.

Dev One
Vintage Pair
Vintage Pair
Posts: 2576
Joined: 10 Jul 2009, 08:33
Location: Chacombe about 2 mile east of M40 J11

Re: DH9 FSX Mixture

Post by Dev One »

Referring to the Proctor pilots notes, the mixture control was either WEAK or RICH. WEAK was only for maximum range where one kept the boost & RPM low as well as airspeed. Otherwise the mixture control on the Gipsy Queen II's were automatic. I suspect that the Queen I's were similar. The Proctor throttlebox was also interlinked so that on closing the throttle for the descent, it automatically went to RICH. Now in FS9 ( & possibly FSX) I suspect that the inbuilt logic does not follow this sequence, neither does the start sequence for Queen II's where one starts in Coarse pitch! I certainly failed in my sim Proctors in that respect!
Keith

PaulC
VC10
VC10
Posts: 566
Joined: 28 Nov 2009, 15:05
Location: Oakworth, West Yorkshire

Re: DH9 FSX Mixture

Post by PaulC »

The mixture does revert to rich when the throttles are closed. Rich it is then!!

Thanks for your tips; Rich or rich then! :thumbsup:

User avatar
Rich
VC10
VC10
Posts: 538
Joined: 26 Jun 2004, 23:12
Location: Philippines

Re: DH9 FSX Mixture

Post by Rich »

Sorry nothing to do with me.

Rich
Rich

User avatar
Garry Russell
The Ministry
Posts: 27180
Joined: 29 Jan 2005, 00:53
Location: On the other side of the wall

Re: DH9 FSX Mixture

Post by Garry Russell »

:lol: :lol: :lol:

I thought you might pop in!!
Garry

Image

"In the world of virtual reality things are not always what they seem."

Post Reply