New RN arrivals
Moderators: Guru's, The Ministry, The Painters
- DaveB
- The Ministry
- Posts: 30457
- Joined: 17 Jun 2004, 20:46
- Location: Pelsall, West Mids, UK
- Contact:
New RN arrivals
Here's a couple of 'What If' RN paints for the Cera UH60L..
Both are still vaguely WIP though they're both about there. Registrations are real.. ZD626/S is a Mk4 Sea King and ZF562/670 is a Lynx. I hope they don't mind me borrowing them
ATB
DaveB
Both are still vaguely WIP though they're both about there. Registrations are real.. ZD626/S is a Mk4 Sea King and ZF562/670 is a Lynx. I hope they don't mind me borrowing them
ATB
DaveB
Old sailors never die.. they just smell that way!
- DaveG
- The Gurus
- Posts: 7758
- Joined: 23 Jun 2004, 18:05
- Location: in a deep, dark hole somewhere.
- Contact:
Re: New RN arrivals
The grey one looks good. Not sure about the green one though
771sq next then Dave?
771sq next then Dave?
Dave G.
- DaveB
- The Ministry
- Posts: 30457
- Joined: 17 Jun 2004, 20:46
- Location: Pelsall, West Mids, UK
- Contact:
Re: New RN arrivals
Indeed mate I'm not sure about the green one either though to be honest.. I'm not sure about the green Sea Kings either . The green I used was nabbed straight off the Virtavia Sea King Mk4 (to keep some sort of commonality) but looks a bit darker on the UH60.. maybe? I'll have to post a shot as a comparison so I can see both at the same time TBH.. I never fly the green Mk4.. not least of all because it's easy to crash. Put the gear up (G) and of course.. the Mk4's gear doesn't animate as it doesn't retract. However.. the model doesn't know that and the contact points change to 'gear up' resulting in sparks everywhere!
I quite like the grey paint.. it suits the UH60 well I think. It'd probably look nicer on an FSX Lynx mind you Why did you hang up your tools Dave.. there are so many things we all want
EDIT: The Virtavia Mk4..
While the colour is actually the same.. shine/alphas/specs e t c are different (as they would be). It'll do for something I'm rarely going to fly Note.. gear DOWN on the Mk4 too
ATB
DaveB
Old sailors never die.. they just smell that way!
Re: New RN arrivals
Dave,
same response here - like the grey but not the green ...
How about an UH-60 in RAF Rescue yellow a la Sea King ?
regs,
Ro
same response here - like the grey but not the green ...
How about an UH-60 in RAF Rescue yellow a la Sea King ?
regs,
Ro
- DaveB
- The Ministry
- Posts: 30457
- Joined: 17 Jun 2004, 20:46
- Location: Pelsall, West Mids, UK
- Contact:
Re: New RN arrivals
Hiya Ro
Yes.. I think the UH60 would lend itself well to RAF Rescue yellow. I have a part finished RN Rescue too which I may get around to finishing one day. I'll make a start on the RAF paint as soon as I see some more clear air (working today and all over the weekend)
ATB
DaveB
Yes.. I think the UH60 would lend itself well to RAF Rescue yellow. I have a part finished RN Rescue too which I may get around to finishing one day. I'll make a start on the RAF paint as soon as I see some more clear air (working today and all over the weekend)
ATB
DaveB
Old sailors never die.. they just smell that way!
Re: New RN arrivals
Dave,
thanks for that - I just hope that it does turn out well; it certainly does look good to my mind's eye ... but my imagination can sometimes be, erm, OTT ! For example, I'd love to see an Osprey in RAF rescue yellow ...
Would the RN rescue be a grey and red one similar to the Sea King again ?
cheers,
Ro
thanks for that - I just hope that it does turn out well; it certainly does look good to my mind's eye ... but my imagination can sometimes be, erm, OTT ! For example, I'd love to see an Osprey in RAF rescue yellow ...
Would the RN rescue be a grey and red one similar to the Sea King again ?
cheers,
Ro
- DaveB
- The Ministry
- Posts: 30457
- Joined: 17 Jun 2004, 20:46
- Location: Pelsall, West Mids, UK
- Contact:
Re: New RN arrivals
Hi Ro
The one I've done is grey with red nose and red band on the boom. The grey one is basically that paint with the red layers unticked Are you thinking one in RN blue/yellow? I've given that some thought already but thought the huge area above the cab might look a bit OTT in yellow I'll see how the RAF yellow looks first
ATB
DaveB
The one I've done is grey with red nose and red band on the boom. The grey one is basically that paint with the red layers unticked Are you thinking one in RN blue/yellow? I've given that some thought already but thought the huge area above the cab might look a bit OTT in yellow I'll see how the RAF yellow looks first
ATB
DaveB
Old sailors never die.. they just smell that way!
Re: New RN arrivals
Yes, Dave, that grey & red one is the one I was thinking of. But, wow, I'm not sure I've ever seen a blue & yellow one on any kind of chopper, and that sounds great ...
Looking forward to everything you produce here,
Best regs,
Ro
Looking forward to everything you produce here,
Best regs,
Ro
- DaveB
- The Ministry
- Posts: 30457
- Joined: 17 Jun 2004, 20:46
- Location: Pelsall, West Mids, UK
- Contact:
Re: New RN arrivals
Ro.. just when I'm off to bed, I see you're here. Lets cross posts hey
What at first seemed easy peasy is not so. The UH60 has a gallon of warning/marking decals where I want to put ROYAL AIR FORCE RESCUE (on one side) so I've dragged the RESCUE to the door for now. I did try putting the RAF on there too but it looked a bit busy. I could probably lob the lot on the boom but it would take the 'replica' yet further away from the original Also.. PSE doesn't really like this map so I've made a new set of maps for use in PS (the text gets changed if I swap between the two) and started again.
The YELLOW.. good grief man. This is v2 and I'm warming to it. I don't like tft's for painting.. crt's were much better. Just as I think I've got the colour.. move your head and bang.. it's changed
Anyhoo.. suggestions welcome for this little tinker
Ahh.. we did cross in the post Re blue/yellow.. I was thinking along the lines of the old RN helicopter colours with yellow upper (engine casing) and dark blue for the body.. like the paints Brian did for his Wessex.
EDIT: BTW.. the grey bits are off different maps (unpainted ones) in case you were wondering if I'd gone completely mad Also.. the boom reg was made smaller in anticipation of ROYAL AIR FORCE adorning it.
ATB
DaveB
What at first seemed easy peasy is not so. The UH60 has a gallon of warning/marking decals where I want to put ROYAL AIR FORCE RESCUE (on one side) so I've dragged the RESCUE to the door for now. I did try putting the RAF on there too but it looked a bit busy. I could probably lob the lot on the boom but it would take the 'replica' yet further away from the original Also.. PSE doesn't really like this map so I've made a new set of maps for use in PS (the text gets changed if I swap between the two) and started again.
The YELLOW.. good grief man. This is v2 and I'm warming to it. I don't like tft's for painting.. crt's were much better. Just as I think I've got the colour.. move your head and bang.. it's changed
Anyhoo.. suggestions welcome for this little tinker
Ahh.. we did cross in the post Re blue/yellow.. I was thinking along the lines of the old RN helicopter colours with yellow upper (engine casing) and dark blue for the body.. like the paints Brian did for his Wessex.
EDIT: BTW.. the grey bits are off different maps (unpainted ones) in case you were wondering if I'd gone completely mad Also.. the boom reg was made smaller in anticipation of ROYAL AIR FORCE adorning it.
ATB
DaveB
Old sailors never die.. they just smell that way!
Re: New RN arrivals
Yeah, the times when I'm online are very erratic, to put it politely.
Personally, I still think that LPs can sound better than CDs - even after seven generations of digital processing, there are times when analogue is still better. Probably not too relevant but I doubt whether it's possible to buy a CRT these days except at extortionate prices.
Anyways, not being a repainter (yet) I'm afraid your comment on the grey alternate maps is lost on me. Would it mean that you can't change the colour of those parts, and, if so, could they be changed by doing an edit on the MDL using a hex editor ? Even so, it gives an impression of what the blue & yellow one would look like, and, given your reminder about the Wessex, that would be brilliant if repeated here in nice shiny gloss colours (as in showroom or display condition). I have to say that my preference on the RAF version would be a brighter shade of yellow, and again in display gloss rather than everyday condition. Of course, given that you have a screenshot there, it may look rather different in the "metal" on my own screen, in line with your comment on the difficulty in getting exactly the shade / hue you want on your own screen.
In any event, you've done a great job there as well as being a good salesman for Cera. Now, how about an RAE / AAEE raspberry ripple version ...
ATB
Ro
Edit - duh, of course you could change the grey bits, as you did in the green one, which is growing on me by the way ...
Personally, I still think that LPs can sound better than CDs - even after seven generations of digital processing, there are times when analogue is still better. Probably not too relevant but I doubt whether it's possible to buy a CRT these days except at extortionate prices.
Anyways, not being a repainter (yet) I'm afraid your comment on the grey alternate maps is lost on me. Would it mean that you can't change the colour of those parts, and, if so, could they be changed by doing an edit on the MDL using a hex editor ? Even so, it gives an impression of what the blue & yellow one would look like, and, given your reminder about the Wessex, that would be brilliant if repeated here in nice shiny gloss colours (as in showroom or display condition). I have to say that my preference on the RAF version would be a brighter shade of yellow, and again in display gloss rather than everyday condition. Of course, given that you have a screenshot there, it may look rather different in the "metal" on my own screen, in line with your comment on the difficulty in getting exactly the shade / hue you want on your own screen.
In any event, you've done a great job there as well as being a good salesman for Cera. Now, how about an RAE / AAEE raspberry ripple version ...
ATB
Ro
Edit - duh, of course you could change the grey bits, as you did in the green one, which is growing on me by the way ...