Classic British Flight Sim

Here's the real thing. All very calm and professional .... not.
Sounds like the captain's really pissed off.

https://www.youtube.com/watch?v=sygrqeh0FRE&t=1343s

OK cooked up a little video for you.

Just the basics to get her flying.

Many thanks, Calypso. Based on your video, I'm inspired to give the -154 another try this weekend.

Here's the real thing. All very calm and professional .... not.
Sounds like the captain's really pissed off.

I've seen that clip several times over the years, and I always feel sorry for the poor "trainee". Apparently the concept of CRM hasn't been fully embraced by this captain. I had an instructor like this once. Quickly found another after several lessons and never looked back...

A lot of the safety issues in the old days were to do with alchohol consumption. The crews when drinking in their rooma at night used to have a toast and their hands made contact not the glasses, so nobody could hear them at the booze.

calypso wrote: ↑

11 Dec 2016, 22:53

OK cooked up a little video for you.

Just the basics to get her flying.


https://www.youtube.com/watch?v=CGImKm0UyS0

Prodigious !!

Thank You, John.

I tried to load this aircraft up a month or so ago. It looks great, but for me I found it too complicated for the few times a year I would fly it.

Since it requires a cold and dark start, with at least 12 steps, in a panel that is all in Russian, it was just too much for my limited attention span.

Joe
After watching John's video​ I've got a good handle on it.
His is far easier to follow than the real world start up procedure in this video.
https://www.youtube.com/watch?v=ln9E8bQ ... e=youtu.be

I've hit a bit of a snag.. I've got no gauges in the panel views.. oh , did I mention I installed it into P3d ver.3.4.
Do you think that would have something to do with it..
I'm still using the P3d that didn't install correctly. I can't install fsuipc and I don't think sim connect is working either.
I really Dread having to muck with it....

When I loaded it up in my P3D 3.4 install it worked ok in that respects, granted I never got it started. I would rename your p3d program folder and try to install again.

Hey Joe,
I've been able to get fsuipc installed in P3d !
.
Then I got my FSX back up working by installing the required .dlls and have fsuipc installed for FSX.

But I still don't have gauges in the panel of the TU 154. In either sim..

airboatr wrote: ↑

02 Jun 2017, 05:21

Hey Joe,
I've been able to get fsuipc installed in P3d !
.
Then I got my FSX back up working by installing the required .dlls and have fsuipc installed for FSX.

But I still don't have gauges in the panel of the TU 154. In either sim..

Alas after deciding I did not want it in my hanger I deleted it and the installer files, and I am going to be away from my computer this weekend but if you have not figured anything out by next week I will see if I retrace my steps and see if I can get it working.