Hi Chaps,
I've been cajoled into releasing this paint for the Wilco Harrier. Done a little more work on it and thought I might offer it here too..
The PK is vaguely do-able but the model itself is a cow and won't allow an accurate paint. Imagine the paint being painted onto rubber 3/4 of it's correct size then stretched over the model. Some things won't show.. some things show ok at certain angles and pony at others. Flaps are mirrored.. the list goes on
Anyway.. if you fancy it, you can grab a copy HERE
Thanks for the prod Matt (Ivey) if you happen by
EDIT: Almost forgot. I don't care for the standard intake blade with it's 'hip' yellow tips so I've added some modded ones to a folder inside the zip. They should work fine from within the XZ484 texture folder (once you've dragged em out of the separate folder) and if you like em a lot.. back up your originals in the HJJ texture folder and drop these in there
ATB
DaveB
FRS1 716 899Sqn
Moderators: Guru's, The Ministry, The Painters
- DaveB
- The Ministry
- Posts: 30457
- Joined: 17 Jun 2004, 20:46
- Location: Pelsall, West Mids, UK
- Contact:
FRS1 716 899Sqn
Old sailors never die.. they just smell that way!
- DaveG
- The Gurus
- Posts: 7770
- Joined: 23 Jun 2004, 18:05
- Location: in a deep, dark hole somewhere.
- Contact:
Re: FRS1 716 899Sqn
Cheers Dave. I'll have to see if the Harrier works in P3d v4. Probably not.
Dave G.
- DaveB
- The Ministry
- Posts: 30457
- Joined: 17 Jun 2004, 20:46
- Location: Pelsall, West Mids, UK
- Contact:
Re: FRS1 716 899Sqn
I think you're right mate. It loads a dll (for the radar) so you're probably on a losing track unless you disable it Likewise.. if you use Rob's VTOL gauge.. this also calls a dll.
ATB
DaveB
ATB
DaveB
Old sailors never die.. they just smell that way!