Page 1 of 1

Brisfit at Flightsim.com

Posted: 21 Jun 2006, 15:45
by FlyTexas
Frank Elton has relased a Bristol F2b Fighter Brisfit over at Flightsim.com. A nice model but no VC. :sad: Still I always appreciate his work. :smile:

Brian

Posted: 21 Jun 2006, 20:03
by Filonian
Thanks for the heads up Brian. Have it in the hangar now.

Graham

Posted: 22 Jun 2006, 16:00
by Kevin
Hi all,

For those who find the undercarriage a bit firm (lots of smoke from bouncy tyres), heres a small mod to the aircraft.cfg - a replacement [contact_points] section:

[contact_points]
point.0= 1.000, -12.000, 0.000, -4.117, 1181.102, 0.000, 0.519, 0.000, 0.436, 2.500, 0.817, 0.000, 0.000, 0.000, 0.000, 0.000
point.1= 1.000, 3.083, -2.917, -6.733, 1574.803, 1.000, 0.519, 0.000, 0.543, 2.500, 0.626, 0.000, 0.000, 2.000, 0.000, 0.000
point.2= 1.000, 3.083, 2.917, -6.733, 1574.803, 2.000, 0.519, 0.000, 0.543, 2.500, 0.626, 0.000, 0.000, 3.000, 0.000, 0.000
point.3= 2.000, 0.000, -17.917, -2.083, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 5.000, 0.000, 0.000
point.4= 2.000, 0.000, 17.917, -2.083, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 6.000, 0.000, 0.000
point.5= 2.000, -13.000, 0.000, 3.333, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 9.000, 0.000, 0.000
point.6= 2.000, 2.417, 0.000, -2.167, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4.000, 0.000, 0.000
static_pitch= 10.097
static_cg_height= 5.612


The only lines modified are 'point.0=', 'point.1=', and 'point.2=', plus the 'static_pitch' and 'static_cg_height' lines. These last two adjust the 'drop-in' height & pitch to zero.

Otherwise, its another lovely aeroplane from Frank. His Gauntlet is one of my favourites.

Cheers,

Kevin

Posted: 22 Jun 2006, 17:46
by Filonian
Thanks for that Kevin.

Don't get indegestion now with all the bouncing about - or keep diappearing in clouds of smoke and dust. Was a bit of a b****r if you forgot your goggles. :lol:

Graham

Posted: 22 Jun 2006, 18:35
by blanston12
Now I know what a Bristol Brisfit is, but was wondering what is a 'Brisfit', i.e. where did the name Brisfit come from?

Posted: 22 Jun 2006, 18:50
by DispatchDragon
Joe

It was the colloquial term for Bristol Fighter (Bris-Fit) something along the same
lines as the HP 0/400 being known as "The Bloody Paralyser" I guess our
grandfathers had a sense of humor as well


Leif

Posted: 22 Jun 2006, 18:57
by Ed Walters
I think Bristol Fighter was a more official name for the aircraft - from what I know, it was generally referred to as the "Biff" by the crews.

By the way, mine is still in development. I will do it eventually...!