Model recognition contest
Moderators: Guru's, The Ministry
- Techy111
- Battle of Britain
- Posts: 3319
- Joined: 15 Aug 2007, 13:51
- Location: Coming out of Retirement.
Re: Model recognition contest
What if one fell off? :fart:
tony
tony
The last surviving and complete Vickers Vanguard....."Superb"






- Garry Russell
- The Ministry
- Posts: 27180
- Joined: 29 Jan 2005, 00:53
- Location: On the other side of the wall
Re: Model recognition contest
Of course...provided they moved two of them around to balance it :roll:
Garry
Garry
Garry

"In the world of virtual reality things are not always what they seem."

"In the world of virtual reality things are not always what they seem."
- Harry Basset
- Victor
- Posts: 231
- Joined: 26 Oct 2007, 08:49
- Location: Whitby, ENGLAND
Re: Model recognition contest
Is it an R7V2 or YC121F? They had very broad 3 bladed props. I thought they had tip tanks which do not appear in the clue pic and I can't place the earlier clue pic which seems to show a fin.
Re: Model recognition contest
I'll accept that as CORRECT. The monickers R7V-2, YC-121F, or indeed Queen of the Skies With Knobs On I would have accepted as well. (I'll do both the Navy and the USAF version, with and without tip tanks.)Garry Russell wrote:Is that the Turbo-Prop Super Constellation?
Garry
I'll address some of the questions raised here tomorrow if I may. For today I'll leave you with this screenshot made by Jan Henk Peereboom (and I think he will offer some more on the Flightsim.com screenshot forum in due course). Ssssst. here she comes ...

Garry, for collecting your prize, please email or PM me your email address. But I gather you may be busy doing other things...
Thank you and very well done, all of you.
Manfred
Re: Model recognition contest
Ahem, jog on, there is only one queen of the skies round these parts! ;-)mjahn wrote: ...or indeed Queen of the Skies With Knobs On I would have accepted as well....
http://www.raf.mod.uk/downloads/wallpap ... 2_1280.jpg
- RAF_Quantum
- The Gurus
- Posts: 2745
- Joined: 04 Jul 2004, 23:36
- Location: NE Lincolnshire UK
- Contact:
Re: Model recognition contest
I learn something new each day, never knew a turboprop Connie existed. Nice!

Rgds
John

Rgds
John

- DispatchDragon
- Battle of Britain
- Posts: 4925
- Joined: 23 Feb 2005, 01:18
- Location: On the corner of walk and dont walk somewhere on US1
- Contact:
Re: Model recognition contest
US Navy had a bunch of them
Rather a nice addition there Manfred looking forward to having a grope of this one
Leif
Rather a nice addition there Manfred looking forward to having a grope of this one
Leif

- Chris Trott
- Vintage Pair
- Posts: 2591
- Joined: 26 Jun 2004, 05:16
- Location: Houston, Texas, USA
- Contact:
Re: Model recognition contest
Agreed. The Turbo Connie will be a great addition. Those T34's are "looking the business". ;-)
Re: Model recognition contest
It's news to me too. I thought the Connie series ended with the "Super G".RAF_Quantum wrote:I learn something new each day, never knew a turboprop Connie existed. Nice!
Rgds
John


Brian
Re: Model recognition contest
Hello again all,
I felt the noose tightening around my neck when Chris dropped the name "Constellation" in an early reply. Other respondents sensed that a turboprop variant might be involved.
The second clue clearly wasn't easily recognizable as a wing tip, but it did show part of the letter F (from USAF) and a broken walkway, which was typical of mil Connies.The squarish wing tip itself could easily be associated with a C-117 (though apparently stationed in Germany never saw one). Or a 1649 Starliner, but that had no USAF connections that I know of. Or indeed a Nord 262 as surmised by Brian, but I believe it exists as a model?
Full marks to Harry who was spot on identifying the MATS stripe, but then possibly excluded the Connie because of missing tip tanks. (I understand they were a later addition.)
The Lockheed Constitution -- now that is a plane I was absolutely fascinated with, also the -- don't you laugh now -- XC-70. Which reminds me to ask, is Jens going to build a six-engined Brab?
After the third clue it took Garry hardly 10 minutes to suggest the right solution. The props did trigger some interesting excursions into various turboprop configurations. Incidentally, one of the YC-121Fs was later fitted with Allison engines serving as a testbed for the Electra project, nicknamed "Elation".
Garry says there was a previous model of a YC-121, but I had googled and searched avsim and flightsim and no hits had come up. I have only been with this hobby since 2002, however ...
Leif correctly identified the mighty 15ft Hamilton Standard blades driven by P&W YT-34 engines packing the then enormous power of 5,000 shp. I believe the P&W's were also experimentally fitted to a couple of C-97s and C-124s. But it was a Navy Turbo Connie which established the speed record for prop-driven transport aircraft in 1956 doing 479 mph.
As far as I know the two USAF Turbo Connies went all over the world on various testing and service flights, and what a show stopper they must have been, if anyone was lucky enough to see and HEAR them. Remember the sound of the T-34 engines in the C-133s as they went over en route to Frankfurt or Mildenhall? It certainly made you drop everything... Which remnds me, I am not too clear at present what I am going to use for a soundset.
Tom Gibson's signature bmp is the "laughing Connie" cartoon that also served as a frontispiece to Stephen Piercey's Propliner journal.
The epithet "Queen of the Skies" was used in Air Enthusiast 14, but I agree there's a worthy successor.
In the tryout version of DBS Walk and Follow, the variable viewpoint utility I mentioned, your movements are restricted to 200 miles in the Moscow area. Here is another typical screenshot not normally available from standard FS9 viewpoints.

Again, thanks to all for contributing,
ATB
I felt the noose tightening around my neck when Chris dropped the name "Constellation" in an early reply. Other respondents sensed that a turboprop variant might be involved.
The second clue clearly wasn't easily recognizable as a wing tip, but it did show part of the letter F (from USAF) and a broken walkway, which was typical of mil Connies.The squarish wing tip itself could easily be associated with a C-117 (though apparently stationed in Germany never saw one). Or a 1649 Starliner, but that had no USAF connections that I know of. Or indeed a Nord 262 as surmised by Brian, but I believe it exists as a model?
Full marks to Harry who was spot on identifying the MATS stripe, but then possibly excluded the Connie because of missing tip tanks. (I understand they were a later addition.)
The Lockheed Constitution -- now that is a plane I was absolutely fascinated with, also the -- don't you laugh now -- XC-70. Which reminds me to ask, is Jens going to build a six-engined Brab?
After the third clue it took Garry hardly 10 minutes to suggest the right solution. The props did trigger some interesting excursions into various turboprop configurations. Incidentally, one of the YC-121Fs was later fitted with Allison engines serving as a testbed for the Electra project, nicknamed "Elation".
Garry says there was a previous model of a YC-121, but I had googled and searched avsim and flightsim and no hits had come up. I have only been with this hobby since 2002, however ...
Leif correctly identified the mighty 15ft Hamilton Standard blades driven by P&W YT-34 engines packing the then enormous power of 5,000 shp. I believe the P&W's were also experimentally fitted to a couple of C-97s and C-124s. But it was a Navy Turbo Connie which established the speed record for prop-driven transport aircraft in 1956 doing 479 mph.
As far as I know the two USAF Turbo Connies went all over the world on various testing and service flights, and what a show stopper they must have been, if anyone was lucky enough to see and HEAR them. Remember the sound of the T-34 engines in the C-133s as they went over en route to Frankfurt or Mildenhall? It certainly made you drop everything... Which remnds me, I am not too clear at present what I am going to use for a soundset.
Tom Gibson's signature bmp is the "laughing Connie" cartoon that also served as a frontispiece to Stephen Piercey's Propliner journal.
The epithet "Queen of the Skies" was used in Air Enthusiast 14, but I agree there's a worthy successor.
In the tryout version of DBS Walk and Follow, the variable viewpoint utility I mentioned, your movements are restricted to 200 miles in the Moscow area. Here is another typical screenshot not normally available from standard FS9 viewpoints.

Again, thanks to all for contributing,
ATB
Manfred