How's that for service. Cheers Rob
EDIT: Works a treat.. lovely and smooth
A question for you Rob.. I note the panel has a Strobe light switch but I don't see strobes on the model with the switch made. Beacon, Strobe and VC light are remmed out in the cfg so I'm presuming they're modelled?
EDIT#2. I removed // from the strobe line in the lighting section and the jolly thing flashes like a good'un It's some inches below the fuse though. A quick position adjustment in the cfg should have that sorted
Did you rem it out because the real one didn't have one or for some other reason?
EDIT#3 Adjusting the last value (-1.28) to -1.00 has the light sufficiently close to the fuse to be convincing
ATB
DaveB
Cessna 310B released
Moderators: Guru's, The Ministry
- DaveB
- The Ministry
- Posts: 30457
- Joined: 17 Jun 2004, 20:46
- Location: Pelsall, West Mids, UK
- Contact:
Re: Cessna 310B released
Old sailors never die.. they just smell that way!
-
- Concorde
- Posts: 1039
- Joined: 12 Aug 2008, 15:58
- Location: Alconbury Weston, UK
Re: Cessna 310B released
The beacon light is, as you rightly say, coded into the model, the VC light was a bit too bright so I edited it out leaving just emissive textures.
The strobe was a leftover from the 310Q which did have them, I read somewhere that aircraft of the “B” models age did not, so edited that out also.
RobR
PS. By coding the beacon light into the model it eliminates the bright red flashing light visible in the VC.
The strobe was a leftover from the 310Q which did have them, I read somewhere that aircraft of the “B” models age did not, so edited that out also.
RobR
PS. By coding the beacon light into the model it eliminates the bright red flashing light visible in the VC.
Last edited by robcarrich on 29 Sep 2014, 14:27, edited 1 time in total.
- DaveB
- The Ministry
- Posts: 30457
- Joined: 17 Jun 2004, 20:46
- Location: Pelsall, West Mids, UK
- Contact:
Re: Cessna 310B released
That works for me Rob.. thanks
ATB
DaveB
ATB
DaveB
Old sailors never die.. they just smell that way!
-
- VC10
- Posts: 512
- Joined: 26 Oct 2004, 08:28
- Location: Near Daventry, UK
Re: Cessna 310B released
Super, Rob, many thanks!robcarrich wrote:Just found the xml. for kohlsman knob.JohnWillimas wrote:S'pose I was looking for a kohlsman adjustment knob or at least a panel hot spot.... but "B" will work, of course. Thanks.
Here is a revised interior model with that part added.
https://www.sendspace.com/file/3i4f43
RobR
Re: Cessna 310B released
Hideeho
been busy and missed this ...
having read through the thread do i make the adjustments mentioned or has the model been adjusted and reuploaded.
I tried dling it last night around mid night k (EST) but got can't open page error.
thanks
been busy and missed this ...
having read through the thread do i make the adjustments mentioned or has the model been adjusted and reuploaded.
I tried dling it last night around mid night k (EST) but got can't open page error.
thanks
-
- Concorde
- Posts: 1039
- Joined: 12 Aug 2008, 15:58
- Location: Alconbury Weston, UK
Re: Cessna 310B released
I've been having a few problems with my site over the past few days, when I tried to view it earlier was diverted to URLMetrics site.airboatr wrote:Hideeho
been busy and missed this ...
having read through the thread do i make the adjustments mentioned or has the model been adjusted and reuploaded.
I tried dling it last night around mid night k (EST) but got can't open page error.
thanks
Seems ok now though.
I'll upload a new model with all the little mods, later to-day.
RobR
Re: Cessna 310B released
Thank you Rob. Sorry to hear of your site troubles,
Re: Cessna 310B released
New repaints coming soon to SimOuthouse.
http://www.sim-outhouse.com/sohforums/s ... ased/page5
Brian
http://www.sim-outhouse.com/sohforums/s ... ased/page5
Brian