Prepare 3D Version 5
Moderators: Guru's, The Ministry
Re: Prepare 3D Version 5
I know what I am talking about here. You will be pleased to hear that so far today, I have been unable to run P3DV5 due to CTD at start up.
Marvellous!
Nev
Marvellous!
Nev
Re: Prepare 3D Version 5
Ditched the .cfg file and let it rebuild and it started. Seems it does not like multiple monitors.
Nev
Nev
Re: Prepare 3D Version 5
Normally I'm the one complaining but not this time - so far.
Spent most of the day loading up all the ORBX files and then testing. True Earth GB did cause a significant drop in FPS to around 12 but everything else was absolutely fine. With the FPS pegged at 30 I did not suffer any CTDs, strange scenery or abnormalities of any kind so I am a happy bunny at the moment.
Allan
Spent most of the day loading up all the ORBX files and then testing. True Earth GB did cause a significant drop in FPS to around 12 but everything else was absolutely fine. With the FPS pegged at 30 I did not suffer any CTDs, strange scenery or abnormalities of any kind so I am a happy bunny at the moment.
Allan
- blanston12
- Vintage Pair
- Posts: 2782
- Joined: 28 Jun 2004, 20:45
- Location: San Francsico, California
Re: Prepare 3D Version 5
initially I was getting a lot of CTD but that seemed to be caused by a bug related to the ATC window. Since then I had been very sparing in my use of ATC and had not had any crashes. I loaded up most of my ORBX scenery its been very smooth. For the most part I have left the FPS at the default 30, I did a flight over london with ORBX england and autogen set to max and while the FPS did drop to around 20 but it was still pretty smooth without any stutters and in my opinion very acceptable.
I have not tried TE-GBS yet as it had lots of problems in V4.5 so I am waiting to hear more before installing it and Allan's post is the first post by a non ORBX employee I have seen.
So far I am very impressed by it, at first glance it does not seam revolutionary but it after using it a bit its definitely a major improvement.
I have not tried TE-GBS yet as it had lots of problems in V4.5 so I am waiting to hear more before installing it and Allan's post is the first post by a non ORBX employee I have seen.
So far I am very impressed by it, at first glance it does not seam revolutionary but it after using it a bit its definitely a major improvement.
Joe Cusick,
I am serious, and don't call me Shirley.
I am serious, and don't call me Shirley.
- spatialpro
- Concorde
- Posts: 663
- Joined: 10 Apr 2007, 20:18
- Location: Wessex
Re: Prepare 3D Version 5
I'm very impressed with the speed with which LM wrote and published a fix for the VR issue (left eye flicker). It worked for me and VR is now back to v4.5 standards.
Enhanced Atmospherics (Beta) is very good, but I'll be over moon when it exits Beta and us fully integrated (i.e. inc. VR).
IMO outside of VR most people getting CTD mostly seem to fall into the following groups:
1) OOM for vRAM, which appears to happen to multi-monitor, 4K, study-level, high complexity (not well optimised?!) addon airports 'n' other scenery, "all sliders to the right", heavy users.
2) a mystery related to use of unlimited frames (CTD either as the flight loads, or not long after the flight commences)
In both cases my hunch is that v5 somehow "opens the taps" too much and overwhelms things. I liken it to a fuse tripping in your fuse box when too much current is drawn. The fuse is fine, the wiring is fine... even the electrical device is fundamentally fine, it's just that the new dial on the front of said device now goes from 0-11, where the old one went from 0-10 By limiting things (e.g. FPS and/or sliders) the experience is amazing and things don't trip. I reckon v5.1 (which may come soon, given the rapid response of LM) will change the dial back to 0-10. Anyway, it is late and I'm rambling...!
DX12 certainly improves FPS and smoothness and the visuals are awesome.... speaking of which, I'd already buy v5 all over again simply for the volumetric clouds which no longer rotate and other such silliness as you fly past them!
Andy
Enhanced Atmospherics (Beta) is very good, but I'll be over moon when it exits Beta and us fully integrated (i.e. inc. VR).
IMO outside of VR most people getting CTD mostly seem to fall into the following groups:
1) OOM for vRAM, which appears to happen to multi-monitor, 4K, study-level, high complexity (not well optimised?!) addon airports 'n' other scenery, "all sliders to the right", heavy users.
2) a mystery related to use of unlimited frames (CTD either as the flight loads, or not long after the flight commences)
In both cases my hunch is that v5 somehow "opens the taps" too much and overwhelms things. I liken it to a fuse tripping in your fuse box when too much current is drawn. The fuse is fine, the wiring is fine... even the electrical device is fundamentally fine, it's just that the new dial on the front of said device now goes from 0-11, where the old one went from 0-10 By limiting things (e.g. FPS and/or sliders) the experience is amazing and things don't trip. I reckon v5.1 (which may come soon, given the rapid response of LM) will change the dial back to 0-10. Anyway, it is late and I'm rambling...!
DX12 certainly improves FPS and smoothness and the visuals are awesome.... speaking of which, I'd already buy v5 all over again simply for the volumetric clouds which no longer rotate and other such silliness as you fly past them!
Andy
Formerly "Airtrooper"
i9-10900KF, 64Gb RAM,
RTX 3090, HP Reverb G2, Win10 Pro 64-bit
Saitek Combat Rudder Pedals, Saitek X52 Pro
- DaveG
- The Gurus
- Posts: 7802
- Joined: 23 Jun 2004, 18:05
- Location: in a deep, dark hole somewhere.
- Contact:
Re: Prepare 3D Version 5
Finally had a chance to try v5 last night. Very impressed. No CTD (yet!). Frame rates are up approx 20% for me with the same settings used in v4 plus truesky. Haven't tried VR yet. Took off from EGLC over Orbx TEGBS and flew over London towards Heathrow. Frame rates was locked at 30 and that was where it stayed. I did briefly try setting it to unlimited and it was floating around the 50fps mark. Mind you I haven't added any AI traffic yet.
Will play some more today.
Will play some more today.
Dave G.
Re: Prepare 3D Version 5
Looks as if Andy has nailed it with his observations. My CTD occurs as soon as I load a flight with multiple monitors.
Nev
Nev
-
- Chipmunk
- Posts: 6
- Joined: 12 Apr 2020, 16:02
Re: Prepare 3D Version 5
Make sure you grab the VR Hotfix Dave, it's a must have...seriously..
- Rick Piper
- The Gurus
- Posts: 4766
- Joined: 18 Jun 2004, 17:20
- Location: In front of screen learning 3ds max :/ ...............Done it :)
Re: Prepare 3D Version 5
Hi DG
Does my old Hawk T2 alpha/beta work on v5 ?
Before i make the jump
Does my old Hawk T2 alpha/beta work on v5 ?
Before i make the jump