Avro Canada Jetliner being built for FS
Moderators: Guru's, The Ministry
- Garry Russell
- The Ministry
- Posts: 27180
- Joined: 29 Jan 2005, 00:53
- Location: On the other side of the wall
Avro Canada Jetliner being built for FS
This came up in a thread about the Avro Ashton which although similar in general appearance is not related in any way.
There is a Jetliner under construction for those interested the link to the FS.com forum below
http://forums.flightsim.com/dc/dcboard. ... 2719&page=
Not sure if it's payware of free ware but is still in early stages
Garry
There is a Jetliner under construction for those interested the link to the FS.com forum below
http://forums.flightsim.com/dc/dcboard. ... 2719&page=
Not sure if it's payware of free ware but is still in early stages
Garry
Garry
"In the world of virtual reality things are not always what they seem."
"In the world of virtual reality things are not always what they seem."
-
- Chipmunk
- Posts: 6
- Joined: 16 Oct 2005, 09:49
- Location: Outside Banbridge, Northern Ireland
Hi Everyone,
I am the designer of the Jetliner for FS. I have been coming to this forum for a long time, mostly because of Rick Piper. His work is awesome and I hope to develope like him.
Yes the Jetliner is in the very early stages. Reading up on the history of the jet and trying to get as many pictures as possible, which is very hard to do. I have also upgraded from FSDS 2 to FSDS 3 and hoping to get some of those XML gauges into the VC.
Mark C, if you do create sounds for the Jetliner, can I include them with the release? The Jetliner will be freeware. I have a lot of talented people already helping out but sound is one area that we could use help on. If you are interested in joining the project, e-mail me at vcdg "at" sympatico.ca so we can talk more.
I am hoping to find someone in the Ottawa area to take pictures of the remaining cockpit section. It would be very nice to have some updated pictures of the panels/gauges to work on the VC.
Thanks for the interest.
Zoren
I am the designer of the Jetliner for FS. I have been coming to this forum for a long time, mostly because of Rick Piper. His work is awesome and I hope to develope like him.
Yes the Jetliner is in the very early stages. Reading up on the history of the jet and trying to get as many pictures as possible, which is very hard to do. I have also upgraded from FSDS 2 to FSDS 3 and hoping to get some of those XML gauges into the VC.
Mark C, if you do create sounds for the Jetliner, can I include them with the release? The Jetliner will be freeware. I have a lot of talented people already helping out but sound is one area that we could use help on. If you are interested in joining the project, e-mail me at vcdg "at" sympatico.ca so we can talk more.
I am hoping to find someone in the Ottawa area to take pictures of the remaining cockpit section. It would be very nice to have some updated pictures of the panels/gauges to work on the VC.
Thanks for the interest.
Zoren
im pretty sure you are goona get ome help from here (tho not much from me, as i am into the more modern stuff :razz: )Zoren wrote:Reading up on the history of the jet and trying to get as many pictures as possible, which is very hard to do.
Good luck, and i look forward to flying her. (PS: is a VC possible...obviouls a little hard to get textures, but im curious:P)
- Garry Russell
- The Ministry
- Posts: 27180
- Joined: 29 Jan 2005, 00:53
- Location: On the other side of the wall
Hi Mulletman
Zorens mentions a VC in his post
Zoren
Welcome to the forum this is the place to be for help and advice.
An usually a quick response too as you probably allready know as a visitor
Nice looking project. I did have a article featuring the Jetliner in Take off magazine with nice colour three view and a pics but I have been looking but can't find it.
If I do I will scan
Garry
EDIT*************
Found it the only pic was water damaged as was this
from Take Off magazine
Here for a general look at the aircraft
Zoren if this is any use and you want it I can send the original scan which is almost twice this size.
Garry
Zorens mentions a VC in his post
Zoren
Welcome to the forum this is the place to be for help and advice.
An usually a quick response too as you probably allready know as a visitor
Nice looking project. I did have a article featuring the Jetliner in Take off magazine with nice colour three view and a pics but I have been looking but can't find it.
If I do I will scan
Garry
EDIT*************
Found it the only pic was water damaged as was this
from Take Off magazine
Here for a general look at the aircraft
Zoren if this is any use and you want it I can send the original scan which is almost twice this size.
Garry
Garry
"In the world of virtual reality things are not always what they seem."
"In the world of virtual reality things are not always what they seem."